THERMOGROUP SRB2512 12VOLT ROUND LADDER HEATED TOWEL RAIL BRUSHED STAINLESS STEEL

SKU: SRB2512

$519 inc. GST

16 People watching this product now!
  • Pick up from Store

Please call at 0493 130 721 to confirm stock.

Free

  • Courier delivery

Our courier will deliver to the specified address

Calculated at Checkout

  • Up to 10 year Manufacturer Warranty
  • Free 30-Day returns

Payment Methods:

Description

Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The SRB2512 Heated Towel Rail is a 550×550 4 bar brushed stainless ladder rail.

The SRB2512 electric towel dryer is a 12v unit, this means that it can be installed close to a wet area in the bathroom. The rail comes supplied with a transformer which reduces the incoming voltage from 240v to 12v. The rail will still operate at the same temperature and use the same amount of electricity as an equivalent 240v rail as the wattage is the same, however, the rail is operating at a lower voltage.

The rail has a wiring point on both the left and right-hand side of the rail and can be wired at either the top or bottom of the rail. As it is a 12v unit and needs to be wired to a transformer the rail can only be hardwired.

The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. As the rail is electric it is very energy efficient and can cost as little as a $1 a week to run.

 

Product Code SRB2512
Output 65Watts
IP Rating IP55
Warranty 7
Lead Length 1.5m
Voltage 12Volt
No of Bars 4
Wiring Type Hardwired Only
Wiring Position Any leg
PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications.

Specification

Additional Details

Brand

Thermogroup

Available Finishes

Brushed Stainless Steel

Customer Reviews