Specification
| Material | 1.5mm #304 Satin Stainless Steel |
| Motor | 1/4 HP, 7500 rpm, Brush Type, Dual Ball Bearings Motor Thermal Protection- Auto Resetting Thermostat turns off at 105°C |
| Operating Voltage | 230-240 Vac, 50/60Hz, 2200-2400W |
| Sound Level | 70db (+/- 3) |
| Drying Time | Less than 15 seconds |
| IP Rating | IP 21 |
| Heater Element | 2200W @ 240Vac |
| Heater | Auto Resetting Thermostat turns unit off at 87°C Thermal fuse cuts unit off at 141°C |
| Warm Air | Output: 314.5m3/h (185 CFM) |
| Temp: Ambient +20°C | |
| Protection | 60-sec power cut off, auto reset |
| Timing | 2 sec delay turn off after the last read |
| Circuit Op. Sensor Range |
Infrared Automatic, self-adjusting Adjustable, standard 18cm ± 2cm |
| Case Security | 2 SS theft-resistant hex drive screws (hex key supplied) |
| Net Weight | 4.5kg |
| Dimensions | 268mmW x 283mmH x 100mmD |
| Warranty | 5 Year Warranty (3 Years Parts and Labour + 2 Years Parts only) |
| Note | The unit can be hard-wired by an electrician or used with cord and plug provided |
| * This unit is accessible compliant when installed in accordance with AS1428.1. guidelines. |
